One does not need a home full of things to live. Just like ancient times, all we need is what we can carry on our backs.
I’ve been living and traveling the world this way and have never been more comfortable or complete.
Although this setup was specifically developed with the Triple Aught Design FAST Pack EDC, this guide can also be applied to other similar backpacks. With creativity and your own adaptions, any other type as well.
The backpack, while the primary and most important part of my lifestyle kit, is still a part of a larger system. So it’s important to note the 2 other separate packs that work together as a single system.
The challenge of utilizing 3 different types of packs is to work as a single unit simultaneously and individually, I’ve found this works seamlessly.
This means every inch has a specific use and every compartment reserved for specific item types. Much like a well organized bedroom cabinet or office desk.
Despite this, it is still a highly modular configuration that’s situationally adaptable and fully reversible.
Perhaps the most visible modification to my backpack is the netting that covers most of the front. I used a proprietary bungee cargo net that has wiring for electronic purposes (more on this in part 2) but you can find a generic and less costly version here.
This serves as additional carry options for outside of the backpack, keeping the exterior Transport Cube Airflows (more on this later) extra secure as well as a trigger for the alarm system.
Some of the other mods in this post integrate with the cargo net so use them as references and guides.
Underneath the cargo net and mounted on the Transporter Tail are large and small (thin versions) Transport Cube Airflows. While there is room for these in the main internal compartment, these are exposed for ventilation purposes which work well with the mesh design of the cubes.
This was necessitated because of the tropical climates and beach locales I’ll be vagabonding indefinitely in. This means, constant laundry (but sparse drying opportunities), wet clothing and perspiration.
This keeps the cubes completely secure while adding an external layer of compartmentalization, convenient access and easy detachments when needed.
This serves several purposes; cargo net anchor point, alarm system base, and a deterrent to the “slash and drop” method of theft. The TacTies provide additional support for the cable lock as well as footwear holders.
Regardless, the 2 outer TacTies can be used to securely attach almost any type of footwear each.
A rugged but elastic tether has been integrated to the bottom of the right shoulder strap. The purpose of this is to temporarily attach to another bag or item in public places. For when my attention is elsewhere, sleeping at a station or as a quick item anchoring device.
For example, I would clip it to my belt if I’m napping waiting for a bus or to a secondary bag while I’m busy buying tickets for a bus, for theft protection.
The mods and additions in this area of the backpack is dedicated as an attachment point for the cargo net. An Arcus Carabiner connects the net to a mini C5 Case of which doubles as a quick access albeit small compartment (shown with a LockOut canister).
In addition, the C5 Case’s strap can be loosened or tightened to adjust the cargo net’s capacity.
Integrated onto the MOLLE of the side of the backpack kit is a Triple Aught Design iComm Pouch (discontinued, decent alternatives can be found here). This compartment is reserved for my first aid kit.
Ideally placed on the exterior of the backpack for quick access with the contents sealed in an ALOKSAK bag.
Although the RDDP1 Pouch can be mounted to the backpack via MOLLE, I opted with the Arcus Carabiner due to constant detachments for different uses with and without the backpack. However, I primarily use it to store my Raptor Hoodie Jacket.
This pouch when not in use, can be self packed, making it 14 times smaller and ideal for minimalist carry.
This is a dual function security lock mechanism. A cable lock is fully integrated around the entirety of the backpack and can be locked on to stationery objects (poles, furniture) to protect against “snatch and runs”.
The zippers of the primary compartments are modified to serve as locking ports for the padlock, which is anchored by the cable lock for effective zipper security.
For additional security, each keyring can be applied with a couple of drops of superglue on each opening end.
The first layer of the main compartment is made up of 1 large Transport Cube Viewport for less used clothing (dependent on my current location and climate).
Directly below is a perfectly sized (for this position) microfiber travel towel with the included mesh case.
The top layer of the main compartment is made up of 1 small and 2 medium Transport Cube Viewports which are strategically placed as they are for the most used items; tech, tools, toiletries, shirts and pants.
Upon opening the backpack kit, I am presented with these 3 compartments ready for access without needing to remove anything but exactly what I need.
This is an experimental mobility EDC pack I designed made up of parts from 10 separate gear items and accessories. It’s meant to be worn on the shoulder like cauldron armor and serves as my daypack or go-bag. Essentially the “sidearm” to my backpack.
I created this in need for a small but agile pack with high functionality, speed of accessibility and can be compatibly worn while also equipping my backpack kit.
A post on this pack will be published in the future.
Part 2 of The VINJABOND Backpack Setup Guide will focus on the alarm system, secret compartments, mesh pockets, waterproofing, humidity control, laptop reinforcing and internal Transporter Tail Options.